Custom Ultralow Temperature -40º C Normal LCD Display Module Screen Display for Ourdoors, Cars, Trucks and Tanks Accessories

• Customization: Available
• Usage: Outdoor Low Temperature
• Digital LCD Module Type: Counting Module
• Model NO.: ASK12.7
• Touch Screen Type: Capacitive
• Type: LCM
• Response Time: 12ms
• Viewing Angle: IPS
• Display Technology: TFT
• DOT-Matrix Graphic LCD Module Type: Row/Column-Driven Control Type
• LCD Drive Mode: Multiplex Drive LCD Module
• Customized: Customized
• The Cover Hardness: 6h
• ITO Heater: 0.7mm
• Transparency: ≥85%
• Outline Dimension: 231.9*152.0*2.0mm
• Transport Package: Carton
• Specification: Packing according to order
• Trademark: ASK
• Origin: China
• HS Code: 8531200000
• Production Capacity: 1000 PCS/Month
• Package Size: 30.00cm * 20.00cm * 6.00cm
• Package Gross Weight: 3.000kg

Product Description

product overview
Ultra-low temperature display is customized according to customer needs. Our company has a variety of different forms of TFT screen, OLED screen, ICM screen which can be customized according to different sizes required by customers.

This display heating cover plate can cope with bad weather well and can ensure the normal operation of the display in the cold weather of minus 40'C. It has a good guarantee for the stability of the display performance.

The product is composed of glass cover plate ,ITO heating glass and heating drive plate
Product Parameter
Cover Lens Characteristics

Item	Standard Values	Units
Cover  Type	GLASS: thickness1.1 MM, Tempered Glass(sodium carbonate glass)	--
ITO HEATER	0.7	mm
TRANSPARENCY	≥85%	--
The Cover Hardness	6H	--
ITO resistance	7R/Square(TYP.)	--
Outline Dimension	231.9*152.0*2.0	mm
Quality Requirement	Overflow on the cover lens is not allowed
	bubble D≤0.2mm ok;> NG
	edges breaks and the corners breaks<0.2mm

HEATER DC Electrical Characteristics

Item	Symbol	Condition	Min.	Typical	Max.	Unit
Operating Temperature Range	Top	Absolute Max	-40	-	+70	ºC
Storage Temperature Range	TsT	Absolute Max	-40	-	+80	ºC
Power Supply Voltage	V+	-	13	15	20	V
Power Supply Current	I	NOTE1	-	3.3	4.5	A
Heater resistance	R	-	-	4.5		Ω
Heating power	P	<-20 ºC	-	50	60	W

Note 1:
The heating switch is controlled by thermistor + MCU.
The temperature is reduced to -20 degrees (typical value) to turn on the heating, and the heating circuit works below -20 degrees.
The heating circuit stops working when the temperature rises above +20 degrees
Reliability Test Items and Criteria

No	Test Item	Test contents	Remarks
1	High Temperature Storage	80ºC±2ºC 96H Restore 4H at 25ºC,Power off
2	Low Temperature Storage	-40ºC±2ºC 96H Restore 4H at 25ºC,Power off
3	High Temperature Operation	70ºC±2ºC 96H Restore 4H at 25ºC,Power off
4	Low Temperature Operation	-40ºC±2ºC 96H Restore 4H at 25ºC,Power on
5	High Temperature/Humidity Storage	60ºC±2ºC 75%RH  96H Power off
6	Temperature Cycle	-20°C →  +25ºC  →  60°C →   +25ºC (30mins)    (5mins)    (30mins)    (5mins)                    5 Cycle Restore 4H at 25ºC,Power off

 

 

1. Precautions for Use of LCD Modules  

1. Handling Precautions
1.1 The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc.
1.2 If the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water.
1.3 Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary.
1.4 The polarizer covering the display surface of the LCD module is soft and easily scratched. Handle this polarizer carefully.  
1.5 If the display surface is contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If still not completely clear, moisten cloth with one of the following solvents:                                                          
         - Isopropyl alcohol      - Ethyl alcohol   
     Solvents other than those mentioned above may damage the polarizer.  Especially, do not use the following:      
   - Water                - Ketone               - Aromatic solvents                                              
1.6 Do not attempt to disassemble the LCD Module.
1.7 If the logic circuit power is off, do not apply the input signals.    
1.8 To prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment.               
    a. Be sure to ground the body when handling the LCD Modules.
     b. Tools required for assembly, such as soldering irons, must be properly ground.                   
     c. To reduce the amount of static electricity generated, do not conduct assembly and other work under dry conditions.             
       d. The LCD Module is coated with a film to protect the display surface. Be care when peeling off this protective film since static electricity may be generated.
2. Storage precautions                                                  
2.1 When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps.                             
2.2 The LCD modules should be stored under the storage temperature range. If the LCD modules will be stored for a long time, the recommend condition is:                                  
     Temperature :       10ºC~ 40ºC
     Relatively humidity:  ≤60%           
2.3 The LCD modules should be stored in the room without acid, alkali and harmful gas.     
3. The LCD modules should be no falling and violent shocking during transportation, and also should avoid excessive press, water, damp and sunshine.